OpenIPC Wiki

Table of Content

For Anjoy/Brovotech/Gospell/Uniview boards with SSC335 Soc ONLY!!!

Initial device firmware update

setenv bootargs 'mem=${osmem:-32M} console=ttyS0,115200 panic=20 root=/dev/mtdblock3 rootfstype=squashfs init=/init LX_MEM=0x3fe0000 mma_heap=mma_heap_name0,miu=0,sz=0x1C00000 mma_memblock_remove=1 mtdparts=NOR_FLASH:256k(boot),64k(tech),2048k(kernel),5120k(rootfs),-(rootfs_data)'
setenv bootcmd 'setenv setargs setenv bootargs ${bootargs}; run setargs; sf probe 0; sf read 0x21000000 0x50000 0x200000; bootm 0x21000000'
setenv uk 'mw.b 0x21000000 ff 1000000; tftpboot 0x21000000 uImage.${soc}; sf probe 0; sf erase 0x50000 0x200000; sf write 0x21000000 0x50000 ${filesize}'
setenv ur 'mw.b 0x21000000 ff 1000000; tftpboot 0x21000000 rootfs.squashfs.${soc}; sf probe 0; sf erase 0x250000 0x500000; sf write 0x21000000 0x250000 ${filesize}'

setenv soc ssc335                # Your SoC. ssc325, ssc335, or ssc337.
setenv sensor none               # Your sensor. gc2053, imx307, or sc3335.
setenv osmem 32M
setenv totalmem 64M              # 64M for ssc335.
setenv ipaddr       # Your camera IP address.
setenv serverip    # Your TFTP server IP address.

run uk; run ur; reset            # Flash kernel, rootfs and reboot device

Follow-up quick updates

run uk; run ur; reset


After you have finished flashing new firmware, please run firstboot command to format jffs2 partition used to store settings.

Other info

Human-readable processor names for SigmaStar devices.

The data is obtained from the original firmware.

Engraving /sys/class/mstar/msys/CHIP_ID /sys/devices/soc0/soc_id /sys/devices/soc0/machine
SSC325DE not found 239 INFINITY6 SSC009B-S01A QFN128
SSC335 0xF2 242 INFINITY6B0 SSC009A-S01A QFN88
SSC337 0xF2 242 INFINITY6B0 SSC009A-S01A QFN88
SSC337DE 0xF2 242 INFINITY6B0 SSC009B-S01A QFN128